Back in late 2019 we posted about the Electrosense network which is an open source project aiming to deploy radio spectrum sensors worldwide. The idea is to help analyze and understand radio spectrum usage across the globe. Each sensor consists of an RTL-SDR, Raspberry Pi and an optional downconverter to receive the higher bands.
Recently Dr. Sofie Pollen wrote in and informed us that they have recently upgraded Electrosense and now users can use any sensor on the network to actually decode signals remotely over a web browser. The currently supported demodulators/decoders include FM/AM, ADS-B, AIS, LTE base station info and ACARS. This makes the Electrosense network kind of similar to the KiwiSDR or OpenWebRX SDR network where there are also various decoders built into the web software.
To test it out you need to create an Electrosense account at electrosense.org. Once logged in, go to "My Electrosense" on the top right, and choose "Spectrum Decoder". You can then choose from a number of Electrosense contributors stationed around the world. Once the waterfall is displayed you can click on signals to decode and listen to them, or change the decoder. Changing to ADS-B or AIS will bring up a map with decoded aircraft or boat positions. Changing to ACARS or LTE will show a text window with the decoded information.
A full electrosense kitset can be purchased from Jetvision, however Sofie notes that they do ship free sensors to some people who cannot afford the kit, and you can apply to increase coverage in your area via this link.
